|
Static
Eliminator Power Paks
 Electrical
static control equipment is powered by Power Paks.
Each Power Pak converts standard line voltage to
an output voltage of 4000, 5000 or 7000 volts, which
enables the static control equipment to ionize air
by means of a high voltage discharge.
The
standard Power Pak has two terminals into which
the power cables for the equipment are inserted.
These terminals combine the features of a bayonet-type
connector with a standard screw-lug connector to
assure absolute and positive electrical connection
which cannot be accidentally separated.
| H164 |
Power Pak, 4KV, powers
up to 45 H/E&T Nozzles, 120v (old# SE1524). |
| G165 |
Power Pak, 5KV, powers 1 or 2 COBRA Guns, 120v |
| S165 |
Power Pak, 5KV, powers SM bars, MESB bars, 4004122 In-Line ionizer, 4003970 Cartridge with pilot lighted on/off switch. |
| F167 |
Power Pak, 7KV, powers up to 200” of
bar, 120v (old# SE1501). |
| F167S |
Power Pak, as above, with pilot lighted on/off
switch (old# SE1501P). |
| N167 |
Power Pak, 7KV, powers up to 4 bars or
Air Blowers, 120v , hard wired with on/off switch. |
Power Paks have 6’ primary cord. Some power
paks also available in 230V versions.
Power Paks have two terminals. If more than two
devices are to be operated from one Power Pak, a
Multiple Connection Block is available.
4002343 Multiple Connection Block
|
