|
|
Other
Electrical Static Eliminators
| Aerostat Phoenix Extended
Range Ionizing Air Blower efficiently
covers a distance of up to 10' with an electrically
balanced (+30V) ionized air stream. Air volume
variable to 300cfm. Disposable air filters.
Dimensions 16.375" x 9.75" x 13.25", 16 pounds.
Includes high voltage status light and built-in
ionizing point cleaning brush. Supplied with
bench mount. Portable floor stand available. |
 |
 |
AS20 Industrial Ionizing
Air Blower neutralizes
static charges at distances up to 10'. Air volume
variable to 300 cfm. It may be mounted to a horizontal
support or to an optional portable floor stand.
Two blowers can be operated from one F167 or
F167S Power Pak. Disposable air filters. |
IVSE5000 Ionizing Air Blower neutralizes
static charges at distances up to 10’. Air volume
variable to 255 cfm. Dimensions 12” x 6.25” x
10”. 8 pounds. Tilt stand allows 250 degree
rotation. Internal power pak. Telescoping (50” to
74”) portable stand available. disposable
air filters.
Also see Nuclear Ionizing Air Blowers |
 |
| CURASTAT Compressed air
ionizers are available
to neutralize a static charge while blowing away
contaminants or to neutralize static electricity
at a distance. Air filters
are recommended for all compressed air ionizers. |
 |
Cobra Ionizing Air Gun cleans
and neutralizes large surfaces such as in furniture
manufacturing, plastic fabrication, and metal
pre-paint. Gun and 20’ cable weigh 1.4
pounds. Use with G165 Power Pak.
Also see Nuclear Static
Eliminator Guns |
 |
4004122 (old
SE1380) CURASTAT Ioncels,
designed for permanent in-line mounting, can
be used for blow off or as sheet separator systems.
1-1/2" long
and 1-7/8" in diameter, Ioncels have 1/4" NPT
air fittings at each end. 7' power cord. Use
S165 Power Pak. |
SE2387T&E High Performance
Ionizing Hot Nozzles (H style) are
highly efficient blow off devices. Up to
45 Nozzles may be used with H164 Power Pak.
Air fitting is 1/8" NPT. May
be used individually or mounted to a manifold
header. Air flow is at 45 degrees. Use one “E” unit
and as many “T” units as desired
with appropriate cable kit. Ask about available
manifold header systems.
| SE2387E |
Nozzle (for end of power cable) |
| SE2387T |
Nozzle (use along power cable) |
| SE9001 |
Power Cable Kit, 10' |
| SE9002 |
Power Cable Kit, 20' |
| SE9003 |
Power Cable Kit, 30' |
|
 |
 |
SE2386T&E Shockless
Ionizing Nozzles (HS style) provide
blow-off similar to above where shockless
performance is desired. Up to 45 Nozzles
may be used with F167 or F167S Power Pack.
Use one “E” unit and as many “T” units
as desired with appropriate cable kit. Ask
about available manifold header systems.
| SE2386E |
Shockless Nozzle (for end of power cable) |
| SE2386T |
Shockless Nozzle (use along power cable) |
| SE9011 |
Power Cable Kit, 10' |
| SE9012 |
Power Cable Kit, 20' |
| SE9013 |
Power Cable Kit, 30' |
|
|
|
