STATICIDE is an easy-to-use topical antistatic solution widely used in a broad range of industrial and office applications. It is easily applied to walls, ceiling, floors, carpets, fixtures, work surfaces, tools and equipment, conveyor belts, and other materials. STATICIDE is available in Concentrate, Heavy Duty and General Purpose solutions.

STATICIDE Concentrate can be diluted and mixed with water or various solvents. Available in 1 quart bottles, 1 gallon bottles, 50 gallon drums. Diluting 1 to 39 creates Heavy Duty STATICIDE. Diluting 1 to 99 creates General Purpose STATICIDE.

Use Heavy Duty STATICIDE for porous, absorbent, or high friction surfaces. Available in 1 quart spray bottles, 1 gallon bottles, 5 gallon pails, 50 gallon drums.

Use General Purpose STATICIDE for non-porous or low friction surfaces or clear high gloss materials. Available in 1 quart spray bottles, 1 gallon bottles, 5 gallon pails, 50 gallon drums.

Individually packaged wipes are made with a specially blended solution of pure STATICIDE concentrate, deionized water, and isopropyl alcohol to provide one-step cleaning and static control. Wipes are long-lasting, non-toxic and biodegradable.

STATIK-BLOK® FDA-3 Anti-Static Solution is a long lasting industrial strength anti-stat suitable for use on food contact surfaces. It may be wiped, dipped or sprayed as need dictates, and is wear and rub-off resistant. STATIK-BLOK FDA-3 is excellent on PVC, polystyrene, nylon and other plastics. (not shown)

STATIK-BLOK FDA-3 Anti-Static Solution is an aqueous solution of one of a group of surface active materials regulated by the FDA under CFR 178.3400 for use in the manufacture of articles that contact food. There is no limitation in this regulation of the kind of food allowed to contact an article containing STATIK-BLOK FDA-3, or on the kind of material (plastic, etc.) of which the article is made, or on the use level of STATIK-BLOK FDA-3 except for the general “good manufacturing practice” requirements to use no more than necessary and that “the quantity that may become a component of food shall not be intended to, nor in fact, accomplish any physical or technical effect in the food itself.”

Surfaces properly treated with STATIK-BLOK FDA-3 Anti-Static Solution meet and exceed standards for electrostatic decay times as set forth by NFPA 56A and MIL B-81705B, in accordance with Federal Test Standard 101C, Method 4046.

STATIK-BLOK FDA-3 Anti-Static Solution is available in ready-to-use solutions and in 10:1 concentrate. 10:1 concentrate may be diluted with water and/or isopropyl. A gallon of 10:1 concentrate yields 11 diluted gallons.