Phone 800-783-9999
Solutions to Static Problems

Electrical Power Sources

Electrical static control equipment is powered by Power Paks. Each Power Pak converts standard line voltage to an output voltage of 4000, 5000 or 7000 volts, which enables the static control equipment to ionize air by means of a high voltage discharge.

The standard Power Pak has two terminals into which the power cables for the equipment are inserted. These terminals combine the features of a bayonet-type connector with a standard screw-lug connector to assure absolute and positive electrical connection which cannot be accidentally separated.

H164 Power Pak, 4KV, powers up to 45 H/E&T Nozzles, 120v (old# SE1524).
G165 Power Pak, 5KV, powers 1 or 2 COBRA Guns, 120v, on/off Switch
S165S Power Pak, 5KV, powers SM bars, MESB bars, 4004122 In-Line ionizer, 4003970 Cartridge, with pilot lighted on/off switch.
F167 Power Pak, 7KV, 2 terminals. Powers AS20 Fans, up to 200" or bar or up to 45 HS/E&T Nozzles. 120v (old# SE1501).
F167S Power Pak, as above, with pilot lighted on/off switch (old# SE1501P).
N167 Power Pak, 7KV, 4 terminals. Powers AS20 fans, up to 300" of bar, or up to 100 HS/E&T nozzles. 120v , hard wired, on/off switch.
Power Paks have 6' primary cord. Some power paks also available in 230V versions.

 

Amstat Industries, Inc.
3012 N. Lake Terrace • Glenview, IL 60026-1335
Toll Free (800) 783-9999 • Phone (847) 998-6210 • Fax (847) 998-6218
Site Map